What problems should be paid attention to in stamping parts processing

1. Metal Stamping parts should be strictly inspected before installation and use, dirt should be removed, and the guide sleeve and die of drawing stamping parts should be carefully checked for good lubrication. Regularly check the punch turntable and the die mounting base of the stamping parts to ensure the coaxial accuracy of the upper and lower turntables.
2. During the processing of metal stamping parts, if you need to adjust and install the mold, you must turn off the power before proceeding. Although it can be done without turning off the power, the risk index will greatly increase. Therefore, for safety, it must be in the power supply. Completely turn off the machine and perform operations after the machine has completely stopped running.
3. In the processing of metal stamping parts, the existence of fastening screws will have a certain protective effect on the processing safety of metal stamping parts. In order to prevent this protection from becoming a hidden danger, the fastening screws must be fastened frequently to ensure that they are fastened. Screws can play a safety function.
4. Install protective devices. Due to the small production batch, safety protection devices must be installed in stamping operations that can neither achieve automation nor use safety stamping tools to prevent injury accidents caused by operating errors. Various protective devices have their own different characteristics and scope of use, improper use can still cause injury accidents. Therefore, it is necessary to clarify the role of various metal stamping parts processing protection devices in order to achieve correct use and ensure safe operation.
5. When the punch and die edges of the stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die.