What to pay attention to when maintaining mold inserts

1. Check whether there are foreign objects in the card slot
The mold insert will sink after a long time of use. Once you find this phenomenon, you have to open it to see if there is any foreign matter in the card slot of the mold insert to confirm the cause of the sinking. If it is, it must be cleaned up in time.
2. Maintain the cleanliness of the gap
Since the mold inserts will be added with lubricating oil when they are in use, if the oil stains after use are left in the gap for a long time, the movement of the mold inserts will not be so flexible, so if there are oil stains, you must use a special cleaner Clean, by the way, you have to go through the process of blow-drying.
Third, check the cracks and damage in the corners
Mold inserts will inevitably encounter bumps during use. Some small bumps cannot be ignored. Regular comprehensive inspections must be performed. It is necessary to know that cracks and breakages will affect the normal functioning of mold inserts, and timely repairs can be avoided. .
Four, frequently moving parts need to be lubricated
One of the major advantages of mold inserts is to prevent mold breakage. For parts that often move, add some lubricating oil to prevent jamming and control the wear range in time.