1. Hardware molds are used in industrial production to use various presses and special tools installed on the presses to make parts or products of the required shape from metal…
Hardware mold and plastic mold introduction
Sharing of stamping processing principles
In life, hardware has been used in many places. With the development and progress of society, the application of hardware is also increasing. At present, many hardware products in China,…
Introduction of drawing oil for stamping parts
1. The smoothness of drawing oil: This is the most important function of drawing oil. The smoothness is not good, and the workpiece will split, the plate and metal will…
Application request for stamping parts
1. Blanking: It is a process in hot stamping forming, punching out the required outer contour blank of the plate. 2. Austenitization: includes two stages of heating and holding. The…
Reasons and treatment methods for turning over and misinterpretation of precision stamping parts.
1. It is caused by the burrs of the punching parts produced during blanking. Need to study the cutting edge, and pay attention to check whether the blanking is reasonable.…
Knowledge sharing of precision stamping parts
Metal Stamping processing is mainly processed by classification, which can be divided into independent processes and constituent processes into two categories. The separation process, also known as stamping, is to…
Planning standards for precision metal stamping
Precision Metal Stamping is a kind of high-precision stamping processing. The stamping parts produced by this processing have high precision, good quality and good appearance. However, this requires good processing…
Introduction to the stretch forming process of metal stamping
There is a process in the stamping process called stretch forming, this process is one of the main processes of stamping process, all Metal Stamping processes will use this stretch…
How to maintain and maintain the stamping die
1. During the use of Metal Stamping dies, punch breakage, twists, and gnawing will occur. Punch sleeves are usually gnawed, and the damage of punches and sleeves is generally replaced…
Introduction to precision stamping parts knowledge
1. There is no need for excessive consumption of materials; after stamping, the weight of stamped parts is greatly reduced and the hardness is well maintained. After plastic deformation, the…