Blanking, bending, stretching, different processes have different requirements for the plate, and the selection of materials should also consider the choice of the plate according to the general shape of…
Some Stamping Process Knowledge
What Is Stamping Process
1. The Metal Stamping parts are manufactured by stamping under the premise of low cost of materials. The parts are light in weight and rigid, and after the sheet material…
Basic knowledge of hardware mold structure
(1) The blanking die separates the material along the closed or open contour line. Such as blanking die, punching die, cutting die, slitting die, trimming die, cutting die, etc. (2)…
Material band method for metal stamping continuous die
The successive mold is to place the stamping process (station) required for the finished product in the same set of molds for punching. The materials used for the successive molds…
General guidelines for storage of hardware products
When storing metal materials, clean and dry operations both inside and outside the warehouse, away from factories and workshops where harmful gases and dust are generated, and do not store…
Characteristics of stainless steel stamping parts processing
1. Defects such as high yield point, high hardness, significant cold work hardening effect, and easy cracks; 2. In the processing of stainless steel stamping parts, the thermal conductivity is…
Introduction to improve the flatness of stamping parts
1. Using fully automatic stamping production line for stamping parts processing, the highest production cycle can reach 25 times per minute, so that the production efficiency has been significantly improved;…
Principle of stamping process
Through the punch and die punching plate, strip, pipe and profile, etc., external force is applied to deform or separate the plastic to obtain the desired shape and size of…
How will the quality of stainless steel stamping parts be affected?
Compared with other methods of mechanical processing and plastic processing of stainless steel stamping parts, Metal Stamping processing has many unique advantages in both technical and economic aspects. The proportion…
What to do when the stamping parts are turned over?
1. Compact the material. Improve the traditional mold design structure, and open a material-containing gap on the discharge plate (that is, when the mold is closed, the discharge plate is…