1. Before stamping, there must be plate straightening adjustment process steps or automatic correction tooling to ensure that the raw materials enter the mold cavity smoothly. 2. The position of…
1. Improve the rationalization level of the process. 2. Improve the mold design level, reduce the process, and increase the life of the mold. 3. Improve the automation and high-speed…
1. Metal Stamping parts should be strictly inspected before installation and use, dirt should be removed, and the guide sleeve and die of drawing stamping parts should be carefully checked…
1. The protection of the stamping die working area by the stamping parts processing plant 1. Install protective devices around the stamping die. 2. Reasonable design of molds reduces the…
7GA = 4.5mm 10GA = 3.2mm 11GA = 3.0mm 13GA = 2.3mm 14GA = 2.0mm 16GA = 1.6mm 17GA = 1.4mm 18GA = 1.2mm 20GA = 1.0mm
Passive: Passive electronic components are one of the most commonly used parts in the entire industry. These components do not transfer energy like their active components, and can only use…
1. The mold core positioning hole is worn out due to frequent and multiple combinations of the mold core, resulting in large gaps after assembly (looseness after assembly) or uneven…
1. What is the clearance between the guide post and the guide sleeve, whether there are burns or wear marks, and whether the oil supply state of the mold guide…
1. Reform the processing technology, molds and operating methods of Metal Stamping parts to realize manual work outside the mold. For mass production operations, we can start with reforming the…
Die is the main process equipment of stamping parts processing manufacturers. The surface quality, dimensional tolerances, productivity and economic benefits of stamping parts have a great relationship with the mold…