1. The number of steps should be determined reasonably: the number of steps in the continuous die is equal to the sum of the decomposed single steps, such as the…
Continuous mold manufacturing needs attention
What are the classifications of stamping dies
1. According to the classification of mold processing technology, Metal Stamping dies can be divided into 1. The blanking die is a metal die that separates materials along a closed…
Stamping processing method to improve material utilization
1. For some special-shaped precision stamping parts, the arrangement of blank sheets in the uncoiling blanking die can be optimized to reduce waste, unwind as many blank sheets as possible,…
The effect of the properties of metal raw materials on metal tensile properties
Metallic materials are the general term for materials with metallic characteristics, usually composed of metallic elements or metallic elements, mainly including pure metals, special metals, alloys, and intermetallic compounds of…
Reasons for mold damage
(1) Assembling error: Wrong installation of parts position and direction and damage. (2) stamping and stacking: the overlap of the blanks continues to be pressed, usually because the stripping board…
Design principle of large stamping drawing die
1. The dimension is stable. During the forming process, the surface of the plastic part in contact with the stamping and drawing die has better dimensional stability than the part…
Introduction of stamping parts layout
The cost of stamping parts production is mainly the cost of raw materials. According to statistics, the cost of raw materials in stamping parts accounts for more than 60% of…
Introduction to the tearing of stamping parts
1. The forming process parameters are not in place In the forming process of the part, the process requires that the die, the blanking core and the two must be…
Introduction to the selection of stamping dies
1. Consider the die set under "Selecting the stamping die", analyze whether the straight line to be stamped is greater than or equal to 1.5 times the side length of…
What are the continuous molds for metal stamping parts?
1. Continuous mold material belt function: The continuous mold is to arrange the stamping process (station) required to complete the product in the same set of molds for punching. The…